Orion Platform Lift is an electrically battery-powered Platform launched onto the market for the first time in 2009. Figo elevators, like all our lifts SMART POWER technology.
This technology offers many advantages Orion Platform Lift consumes just 130W*, on a par with that needed to use everyday electrical appliances. There is no need, therefore, to change the supply contract stipulated, nor is there any need to install another meter with a higher power level.
Another advantages is that while in use, the energy produced by Orion Platform Lift is not wasted as heat but stored in the batteries by optimizing the performance levels of the lift and dramatically bringing down electricity supply costs. The Orion Platform Lift main power supply is based on the use of batteries. It is, therefore, possible to continue using the lift even if there is an unexpected power cut, which guarantees accessibility and safety at all times. The possibility of having the Orion Platform Lift with solar panels means SOLAR POWER can be used as a source of SUSTAINABLE ENERGY.
Orion Platform Lift can be perfectly adapted to the contours and style of the home, creating a new connection in perfect harmony with its surroundings.
The wide choice of materials and colors means that we can offer
“tailor-made” solutions which are perfect for meeting all of your requirements.
Up to 2.99 meters in altitude, the brand new Figo Orion Platform Lift guarantees vertical lifting for every need, both for the family and the home, and for the disabled in a wheelchair.
Designers (architects, surveyors, surveyors, engineers) in order to overcome existing architectural barriers, increasingly prefer vertical lifting systems such as the Orion Platform Lift.
Load capacity: up to 400 Kg
Stroke: 2 stops/ 2.990 mm
Drive: with electric motor and worm screw
Velocity
0.05 m/sec (Versions 1,100, 1,600, 2,100)
0.10 m/sec (Versions 2.600, 2.990)
Engine and power supply Engine placed inside the travel compartment with the following specifications:
Power 2.2 Kw
Line voltage: 230V ± 5%, AC – 50Hz single-phase;
Auxiliary supply voltage: 24V DC;
Attacks Chosen by customer:
with pre-walled anchor brackets (standard)
wall rear with mechanical plugs
wall behind with chemical plugs or beam
Guides
In machined T70-1A profiles.
The system is supplied as standard with a platform covered with non-slip almond aluminum sheet, protected by two walls – column side as standard always buffered with blind panel RAL 7040 color sheet and external side buffered with transparent polycarbonate. The gate on the standard high floor is buffered with transparent polycarbonate.
The flat 0 push-button panel is always supplied with the system in the wireless configuration. The versions in free compartment are always supplied with manual edge gate buffered with transparent polycarbonate and photocells on the landing side and behind the push-button wall.
The system can be installed both inside a building and outside, in two different ways: Free environment Masonry compartment
© 2024 Created with Ajax Technology
